Comanda instant Ultrasonic sensor XX, sensing range 0.5 m, output 0-10 V, M12 connector, 12-24 V DC, Virtu, direct reflex, TELEMECANIQUE
Ultrasonic sensor XX, sensing range 0.5 m, output 0-10 V, M12 connector, 12-24 V DC, Virtu, direct reflex, TELEMECANIQUE
MAIN
Range of product
Telemecanique Ultrasonic sensors XX
Sensor type
Ultrasonic sensor
Series name
General purpose
Sensor name
XX9
Sensor design
Flat form 18 x 33 x 60 + cylindrical M18
Detection system
Diffuse
Material
Plastic
Type of output signal
Analogue
Wiring technique
4-wire
Analogue output function
0...10 V
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Electrical connection
Male connector M12 4 pins
Enclosure material
Valox
Front material
Epoxy
COMPLEMENTARY
Thread type
M18 x 1
Minimum size of detected object
Cylinder diameter 2.5 mm at 0.15 m, flat bar 1 mm wide at 0.15 m
Delay first up
100 MILLISECOND
Current consumption
40 mA
Status LED
Setting-up assistance: 1 LED (dual colour), supply on: 1 LED (green), output state: 1 LED (yellow)
Maximum switching capacity
>= 1 kOhm overload and short-circuit protection
Setting-up
Slope selection using teach button
Delay response
15 MILLISECOND
Delay recovery
10 MILLISECOND
ENVIRONMENT
IP degree of protection
IP67 conforming to IEC 60529
Marking
CE
Standards
IEC 60947-5-2
Product certifications
CCSAusUL
Vibration resistance
+/-1 mm conforming to IEC 60068-2-6 (f = 10-55 Hz)
Shock resistance
30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27
OFFER SUSTAINABILITY
California proposition 65
WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov